If you’ve ever stood in front of a mature, 80-foot oak or a 60-foot maple downed by a storm, staring at a pile of branches and logs that could fill a small truck, you’ve probably wondered the same thing: how long does it actually take to chip a large tree? As a wood chipper supplier who’s worked with residential homeowners, tree service teams, and commercial landscaping crews for over a decade, I can tell you there’s no one-size-fits-all answer. That said, I’ve tracked hundreds of jobs, analyzed common variables, and seen firsthand how small choices can turn a 2-hour job into a full-day hassle—if you skip the right gear. Let’s break this down, with hard science and real on-the-job experience. Wood Chipper

First, let’s define what “a large tree” actually means here. For the sake of this conversation, we’re talking about trees with trunks 12 inches or more in diameter at breast height (DBH, roughly 4.5 feet off the ground), plus all the associated branches, foliage, and root ball debris you might need to process. A smaller, 6-inch sapling takes 10 minutes tops, but a large tree? That’s a whole different category, and the time depends on four core factors: the chipper you’re using, the tree’s characteristics, crew size and experience, and site access.
Let’s start with the most important variable: the wood chipper itself. I’ve seen crews with a 6-inch chipper struggle for 8 hours to process a single large oak, while a team with a 12-inch commercial wood chipper can finish the same job in 90 minutes. Why the gap? Chippers are rated by their maximum feed opening size, which translates directly to the diameter of trunk they can handle without pre-cutting. Let’s get specific: a compact residential chipper (4 to 6 inches) is designed for small, brushy debris—think fallen branches from a 10-inch tree, not the trunk itself. A commercial mid-range chipper (8 to 12 inches) handles most mature trees up to 18 inches DBH. A heavy-duty industrial chipper (15 inches and up) is built for logs up to 3 feet in diameter, the kind of large trees that come down during hurricanes or land clearing projects.
I remember a call last summer from a tree service crew in suburban Chicago. They’d taken down a 16-inch DBH ash tree after an emerald ash borer infestation, and they showed up to the job with their 6-inch residential chipper. They spent 3 hours just cutting the trunk into 4-inch chunks to feed it, and even then, it jammed three times, costing another 45 minutes clearing. The whole job—including chipping all the branches, hauling away the debris, and finishing up—took them 7 hours. A week later, a different crew showed up to the same site with a 12-inch commercial chipper, and they processed the same tree, plus two more 10-inch maples, in 2.5 hours. That’s not a fluke: chipper capacity cuts processing time by 60% for large trees, no exaggeration.
Next, the tree’s characteristics play a huge role. A hardwood like oak or maple is denser and drier than a softwood like pine or cedar, so it takes more force to chip. Dense wood also dulls chipper blades faster, which means you’ll have to stop to sharpen or replace blades mid-job. I once worked with a land clearing team that had to chip 10 acres of mixed hardwoods and pines. The hardwoods added 20% to their total time because every 30 minutes, they’d hit a knot or a dense section that slowed the feed. On the flip side, green softwood (freshly cut) is stringy and can wrap around the chipper’s feed rollers, causing jams. We saw that same crew get held up for 40 minutes one afternoon because a 8-inch pine trunk wrapped around the rollers, and they had to shut the chipper down to pull it free.
Branch size and quantity matter too. A tree with a full, thick canopy of 4-inch branches takes far longer to process than a tree that’s mostly trunk. For a 14-inch DBH maple with a 30-foot spread, you’re not just chipping the trunk—you’re also cutting, feeding, and chipping hundreds of branches. A common mistake for new crews is trying to feed too many branches at once, which causes jams. I’ve seen a crew try to feed 10 branches at a time into a 10-inch chipper, and that single mistake turned a 1-hour job into 3 hours of clearing jams.
Crew size and experience are another big piece. A one-person team will always take longer than a two- or three-person crew. Let’s do a quick real-world breakdown: a two-person crew, experienced with chipping, can process a 12-inch DBH tree (trunk plus all branches) in roughly 1.5 to 2 hours. Here’s how that works: one person operates the chipper, feeds the debris, and clears minor jams, while the other cuts the branches to size, moves logs to the chipper, and disposes of the finished chips. A three-person crew can knock that down to 45 minutes to an hour, because the third person is pre-cutting branches, hauling debris, and managing disposal while the other two focus on chipping. New crews, or crews that only handle small brush, can take twice as long—because they fumble with blade changes, don’t know how to adjust feed speed, and make more mistakes with jam prevention.
Site access and prep also add time. If your job is in a open field with a flat driveway, you can park the chipper right next to the tree, roll logs over, and get to work. But if the tree is in a backyard with a 5-foot fence, or on a steep slope, you have to move logs by hand, cut branches to fit through gates, or even bring in a separate team to clear access for the chipper. I once worked with a homeowner who had a 18-inch DBH oak down in their backyard, 100 feet from the road, with a 6-foot fence blocking access. They had to rent a small skid steer to move logs through the gate, which added 2 hours to their chipping time. Even something as simple as not cutting branches to the right length can add time. If you feed a 6-foot long branch into a chipper, it will get stuck every time—you have to cut branches to 3 to 4 feet long to feed them safely, which is a small prep step that saves hours.
Now, let’s put all this together with real numbers, based on the jobs we see every day. For a mid-sized large tree, 12 to 18 inches DBH, here’s the timeline you can expect:
- Two-person crew, 12-inch commercial chipper, open site: 1.5 to 2 hours (trunk plus all branches, no major jams)
- Two-person crew, 6-inch residential chipper, same tree: 4 to 6 hours (requires pre-cutting trunk, frequent jams, blade changes)
- Three-person crew, 15-inch industrial chipper, 18 to 24 inches DBH: 1 to 3 hours, depending on wood density. Dense hardwoods add 30 minutes, softwoods add 20 minutes for jam clearing.
Wait, what about a very large tree—like a 30-inch DBH oak, the kind you might see on a farm or large property? That’s a full-day job, usually 4 to 6 hours for a three-person crew with a 15-inch chipper, because you’re dealing with a 10-foot long trunk, thick branches, and possibly root ball debris. I did a job last fall with a crew chipping four 28-inch DBH oaks for a vineyard expansion. We had two 18-inch chippers and a three-person crew, and we finished all four in 7 hours, including a 30-minute break for blade sharpening halfway through.
There are also a few hacks that can cut your time significantly, which I’ve learned over years on the job. First, keep extra blades sharp and on hand—dull blades add 25% to your chipping time, because you have to push harder to feed debris and you get more jams. Second, separate your debris: if you feed only branches for the first half, then the trunk, you’ll avoid mixing small, soft branches with large, dense logs, which reduces jams. Third, invest in the right chipper for the job. I’ve seen countless people try to save a few hundred dollars by renting a small chipper for a large tree, only to spend twice as much time and money on extra labor and repairs. A commercial-grade chipper is an investment that pays for itself in time saved on every job.
Now, let’s address a common question: what if you don’t have a crew? Can you chip a large tree on your own? It’s possible, but most homeowners underestimate the time and effort. If you’re going solo, expect to spend 6 to 10 hours on a single 12-inch DBH tree, because you’ll be cutting branches, feeding the chipper, and clearing jams all by yourself. It’s not impossible, but it’s rarely worth the time—most people would rather hire a local tree service, and for good reason.
Whether you’re a property manager tackling storm debris, a tree service expanding your fleet, or a homeowner cleaning up after a big storm, the answer to “how long does it take to chip a large tree” depends on the gear, the tree, and the team. But one thing’s for sure: using the right wood chipper cuts that time drastically, reduces frustration, and makes the whole job safer.

If you’re looking to upgrade your chipper, or you have a specific job in mind and want to talk through timelines and options, we’re here to help. We work with crews of all sizes, from small tree services to large commercial land clearing operations, and we can help you find the right chipper to fit your needs and budget. Don’t hesitate to reach out to discuss your chipping projects, ask questions about capacity and timelines, or get advice on what gear will make your next job smoother and faster.
Lawn Mower References
- International Society of Arboriculture. (2021). “Commercial Wood Chipper Safety and Efficiency Guidelines.” ISA Certification Program.
- USDA Forest Service. (2019). “Wood Density and Chipping Rates for Common North American Hardwoods and Softwoods.” Forest Products Laboratory, Madison, WI.
- National Association of Landscape Professionals. (2020). “Job Time Standards for Tree Processing and Chipping.” NALP Operational Guidelines.
- Chancer, M. (2022). “Chipper Capacity vs. Job Timeline: A Analysis of 500 On-Site Jobs.” Wood Equipment Industry Journal.
Shandong Makco Machinery Co., Ltd.
As one of the most professional wood chipper suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy cheap wood chipper for sale here from our factory. We also accept customized orders.
Address: Room 608, 6th Floor, South Building, Tianfu Center, Huashan Subdistrict, Licheng District, Jinan City, Shandong Province, China
E-mail: info@makcomachinery.com
WebSite: https://www.makcomachinery.com/